Disclaimer: Following this procedure is entirely at your own risk, neither I, Nokia Inspired or it's owners accept any liability or responsibility for any failures, undesirable results, data loss, loss of warranty or damage to the device. The information contained within this guide and the tools to carry out the procedure have been collected from forum posts made on the XDA Forums.
This guide is based on carrying out the procedure using Windows 7, it may be possible to do it on other operating systems, please see the source link at the end of the article for more information. What you will need (click the links to download the software):
The latest version of Zune.
The WP7 update tool.
The WP7 update cab sender tool.
The software update file.
Software capable of opening .rar files.
1. Make sure Zune is installed and working correctly with your phone. You must have it set so that it's the primary sync relationship, if the sync relationship is set to guest mode the update will not work.
2. Double click on the WP7 update tool, inside you'll find two versions, x64 is for 64bit versions of windows, X86 is for 32bit versions of windows. To check which version you have click your windows start button, right click the "computer" button, select "properties" and you'll find the information in there. Now you know your version open the correct folder and you'll find a file called "Setup-UpdateWP-Xxx.exe", run this file and it will install itself. You'll see it start to install then disappear, that is normal.
3. Extract the contents of the WP7_Update_Cab_Sender.zip file to an empty folder on your PC, you'll see two folders and a batch file "Wp7 Update Cab Sender".
4. Copy the software update .cab file you downloaded to the same folder as the batch file, this is important. Do not extract the contents of the .cab file.
5. Connect your phone to the PC, allow it to sync with Zune as normal, then close Zune leaving the phone connected.
6. Run the "Wp7 Update Cab Sender" batch file and you'll see a DOS style text window asking you to select a letter. To start the procedure press the letter "S". Do not close the text window, as it shows you the progress of the procedure or any warnings. Do not disconnect your phone until it is up and running again.
7. Sit back and watch as the progress is updated in that window, first the phone will reboot then it will display an updating screen. After a while a white bar will start to move across the screen showing the progress, when it's finished the phone will reboot. From sending the cab file to the phone to the procedure completing it takes around 10 minutes. When the phone reboots it will tell you that the update completed successfully, now enjoy your freshly updated phone!
You should find that your phone updated without any loss of data at all and that it is still the correct regional version. I do not believe that this procedure voids the warranty, but I cannot guarantee that. No carrier branded is added or removed by using this update.
Source and thanks to: XDA Forums
